Inventory of maintenance methods of plastic wood products
1. How to remove dirt and residue?After the plastic-wood flooring is installed, use soap, hot water, and a hard bristle brush to remove dirt and residue. Use alcohol or acetone to gently wipe the imprint printed on the side of the plastic wood floor. Use conventional floor cleaners or detergents containing bleach (sodium hypochlorite) and detergents.
Tips from Fuk Plastic Wood:
Since WPC is wrapped with a layer of plastic around natural fibers such as wood fibers, the water absorption of WPC is very low. Very suitable for waterfront landscape.
undefined
2. How to remove grease and ink stains?
Grease stains on the floor, immediately use household grease remover to remove, then rinse with hot water. Use hot soapy water to remove ink stains, then wash thoroughly. Use cleaning products containing oxalic acid or phosphate groups to remove dirt and rust on the floor. This will lighten the stains and possibly remove them.
Tips from Fuk Plastic Wood:
WPC will not rot, crack or crack in the wind and sun outdoors, in addition to its ability to resist ultraviolet rays
3. How to remove wine stains and chalk marks?
According to the instructions on the bleach packaging, mix the bleach in hot water to clean wine stains and fruit stains. Wipe the stain gently and rinse with hot water. Wash the area with chalk marks with hot soapy water and bleach. Colored chalk marks are stubborn and cannot be removed, so consider using white chalk or talc on the floor.
Tips from Fuk Plastic Wood:
Plastic wood has excellent properties such as fire resistance, waterproof, corrosion resistance, moisture resistance, no worms, no fungi, acid and alkali resistance, no toxicity, no pollution, etc., without regular maintenance.
4. How to remove pigment precipitation pollution?
Use common rust cleaners to remove pigmentation contamination caused by weathering of the floor. Melt ice and calcium chloride or rock salt on the floor, most home care stores have. When the ice starts to melt, rinse it away.
Tips from Fuk Plastic Wood:
Plastic wood has a long service life and can be reused many times. The average use time is more than five times longer than wood. The cost of use is 1/2 to 1/3 of wood. Can be thermoformed, secondary processing, high strength and energy saving.
5. What should I do if the floor bulges?
First of all, when installing, remember to leave a gap of 0.6 ~ 1mm between the floor and the floor, which is used for the future expansion and contraction of the material.
When installing the floor, the ground must be level and free of obstacles.
If you want to know more about it please do not hesitate to
contact me. WhatsApp:+86-15966835076.
