Investment feasibility analysis of PE offshore pedal equipment

4: Installation and use of marine pedal/fish steak: According to different regions and applications, it is mainly composed of PE marine pedal + PE pipe + PE hollow buoy. Then fix it with some pedal hot melt + screws. According to the requirements of fishermen, marine pedals of different sizes and specifications are produced.

1: The production base of marine pedals: it must be a coastal area. Because the shipping cost and the size of the production are considered, it must be as close as possible to the beach. Especially in some areas, it is directly invested in the seaside after the production is completed.
2: Application of marine pedals/fish steaks: mainly used in deep sea and shallow sea farming, such as some yellow croaker, scallop and kelp farming.
3: Prospects of marine pedals/fish steaks: At present, because of the national plan, especially to encourage more fishermen to green farm, the country has a lot of policy subsidies in this regard, but according to different regions, the percentage of subsidies is different.
4: Installation and use of marine pedal/fish row: according to different regions and applications, it is mainly composed of PE marine pedal + PE pipe + PE hollow buoy. Then fix it with some pedal hot melt + screws. According to the requirements of fishermen, marine pedals of different sizes and specifications are produced.
According to different production processes, Ocean Pedal has undergone two generations of product innovation:


1: Before 2018, PE single layer extrusion. The main raw material is PE. In the early days, because of their unfamiliarity with the products, some enterprises used motors with very large power. So far there are some motors using 180KW. This also resulted in electricity bills far surpassing market peers.


2: After 2018, coextrusion technology is commonly used, with a layer of yellow or green on the surface. Corresponding to two extrusion technologies: co-extrusion before, co-extrusion after. These two factors aside factory demand and price, there is not much difference.


Because of the special size of the product, it is difficult to cool. So the core of the product is how to ensure stability and production speed.


The stability of the equipment must be approached from many aspects. According to our understanding, in order to save costs, many domestic factories save from many key core points, which leads to unstable production of customers, especially in terms of compatibility for future development. So it is recommended that interested friends make sure what you need and what you want before buying.

If you want to know more about it please do not hesitate to contact me. WhatsApp:+86-15966835076.