Learn about the advantages and storage of the carbon spiral tube production line
Learn about the advantages and storage of the carbon spiral tube production lineThe carbon spiral tube production line is mainly a common equipment for producing carbon tubes. Nowadays, more and more carbon tubes are used in many places. So what are the main advantages of carbon tubes?
1. Great cost performance
According to the staff of the manufacturer of the carbon spiral tube production line, due to the characteristics of the spiral technology, it is light in weight, easy to carry, and easy to transport and construct.
2. Seismic resistance
Due to the high tensile and breaking strength of the spiral pipe, the overall performance of the buried pipe is good, the plasticity is good, the compressive strength is high, and it can resist earthquakes and ground subsidence.
3. Withstand voltage
Due to the spiral shape of the tube, the rigidity of the ring is enhanced, effectively bearing the external load.
Carbon spiral tube production line
4. Convenient construction
Due to the characteristics of the spiral process, the pipeline has a wider bending range, which can be bent at will, avoiding obstacles, and adapting to different topographical features. Long pipelines and fewer joints can greatly shorten the construction time and save construction costs.
The storage of carbon spiral tube equipment is a very troublesome problem, because sometimes the product will be damaged due to improper storage. The strength of carbon spiral pipe equipment is usually higher than that of direct welded pipe. It can produce welded pipes with larger pipe diameters and narrower blanks and welded pipes with different pipe diameters and the same width blanks. However, compared with straight pipes of the same length, the welding length is increased by 40 to 100, and the production speed is slower. The outer diameter of the carbon spiral tube equipment is indicated by the letter d, followed by the standards for outer diameter and wall thickness. There should be a certain passage between the stacks of carbon spiral tube equipment. The width of the inspection channel is usually about 0.5 meters. Depending on the size of the material and the transportation machinery, the width of the channel is usually 1.5 to 2 meters. The stacking height of spiral steel pipes shall not exceed 1.2m for workers, mechanical operations shall not exceed 1.5m, and the pile width shall not exceed 2.5m. For example, if carbon spiral pipe equipment steel pipes are stacked in the open air, it is necessary to avoid placing wooden mats or stones on the lower surface of the spiral pipe. The stacking surface should be slightly inclined to facilitate drainage, and pay attention to whether the steel pipe is placed straight to avoid bending of the steel pipe. Deformed. According to the details, if the warehouse is on the cement floor, the height of the bottom of the carbon spiral pipe equipment should be 0.1m.. If it is mud, it must be 0.2 to 0.5 meters high.
The carbon spiral pipe equipment is equipped with a special separate mixing screw and screw head of a polyolefin special single-screw extruder, with a reasonable flow channel and smooth inner and outer walls of the pipe. The production range of the carbon spiral tube equipment is 50-200 mm, and the production speed is as high as 1.5-5 m/min. Flexible, suitable for the supply of a variety of polyolefin materials, can extrude multiple spiral reinforced pipes of different specifications, and can use more than 80 recycled materials. The optimized copper spiral sizing sleeve is equipped with a pre-cooling device and a strong vacuum suction device at the inlet end, which is suitable for pipe extrusion. The specially designed spray cooling water tank is made of stainless steel. Water pump and special nozzles bring spray cooling. Advanced co-extrusion technology and maximum use of recycled materials reduce costs.
If you want to know more about it please do not hesitate to
contact me. WhatsApp:+86-15966835076.
