how much you know PVC reinforced pipe PVC-U reinforced pipe is a novel pipe made of rigid polyvinyl chloride as the main raw material with smooth inner wall and vertical reinforced ribs on the outer wall. UPVC reinforced pipe is a new type of UPVC pipe that is extruded and formed by the extruder at one time, with vertical reinforcement on the outer wall. Chinese name Reinforced pipe Foreign name
what is plastic rods? Plastic rods generally refer to solid cylinders. Here, solid squares, rhombuses and triangles are also called rods. Plastic rods are mainly used to process plastic gears, bolts, bearings and pads on metal cutting machines like round steel. The plastics used for extrusion molding are: polyamide, polyoxymethylene, polycarbonate, ABS, polyphenylene oxide, polysulfone, polyeth
how much you know the PEEK bar? Product Details: I. Overview: PEEK is a high-temperature-resistant thermoplastic with a high glass transition temperature (143 ° C) and melting point (334 ° C), and a heat-transforming temperature of up to 316 ° C (30% glass fiber or carbon fiber reinforced grade) 2. Detailed description: The main characteristics of PEEK rod: 1: High temperatur
Characteristics of polyurethane elastomer extruded rod: 1. Wide range of hardness. And it still has good rubber elasticity and elongation under high hardness. 2. High strength. Under rubber hardness, their tensile strength and tear strength are much higher than that of general-purpose rubber; under plastic hardness, their impact strength and bending strength are much higher than plastic.
Why does plastic bar extrusion break? Reasons for plastic rod extrusion and material breakage: 1) The inlet of the feed hopper is blocked. 2) The temperature in the feeding section of the barrel is too high. 3) There are a lot of impurities on the filter net, clogging _ filter net. 4) The temperature of the forming mold is too low, and the running resistance of the melt is large.
What are the process characteristics of plastic rod extrusion When extruding plastic rods, in addition to reasonable control of the barrel temperature, the temperature and replenishment speed of the machine head and the hot and cold die parts should be properly controlled. This is the key to extruding high-quality rods. (1) Amorphous plastic with high viscosity and poor fluidity. When extrudi
do you know how many kinds of chemical can make plastic bar? Nylon rod manufacturer, rigid pvc rod, PVC rod producer, gray pvc rod, polypropylene (pp) rod, PP rod producer, polyvinyl chloride pvc rod, polymer polyethylene sheet, PE rod manufacturer, upe sheet , Pom rod, uhmwpe sheet, uhmwpe rod, UHMW-PE rod, pe1000 rod, polyamide grease rod, flame retardant nylon rod, flame retardant abs rod, P
Talk about the plastic bar extruder Plastic rods are solid round rods. Due to their excellent physical properties, plastic extruders are widely used in the manufacturing industry, such as making plastic gears, bearings, bolts, nuts, etc. If the production volume is small, it is more economical to process it by mechanical processing; in mass production, it can be produced by extrusion. The raw m
