SPC flooring is a new material, and sales in Europe and the United States are very large.
SPC flooring is a new material, and sales in Europe and the United States are very large. The structural characteristics are as follows:1. Formaldehyde-free: In layman's terms, SPC floors are made of natural materials, hot pressed at high temperature, to avoid the problem of formaldehyde caused by glue bonding. The structure is composed of: PUR crystal shield transparent layer, pure PVC wear-resistant layer, rich color film layer, SPC polymer substrate layer, soft and silent rebound layer, etc. The base material of the floor is mixed with mineral rock powder and perlite powder and allowed to stand in the air for 30 days for natural health. After mixing with polymer resin, it stimulates the viscosity of the mineral molecules of the material itself, just like cement and flour. There is no need to use glue, and then hot press with high precision equipment to form a stable substrate layer.
2. Waterproof, fireproof, non-deformable, non-foaming, and non-mold: the main component is composed of wear-resistant layer, mineral rock powder and polymer powder, etc. Naturally, it is not afraid of water, so there is no need to worry about deformation, foaming, mildew, temperature High and low change and deform. Bedroom, living room, bathroom, kitchen, balcony can be used. Flame retardant, fire rating reaches B1 level, so public spaces are available.
3. Non-slip, flexible, and good foot feel: The surface layer is treated by PUR special process, and the surface thermal insulation performance is good. It will not be cold when stepped on, and the foot feel is more comfortable. The base material is added with a flexible rebound material layer, which has good flexibility and resilience performance. It can be bent 90 degrees repeatedly without any problem. You can play on it without worrying about falling pain. The material of the surface layer has a non-slip design, which will make the SPC floor "more astringent" after encountering water, and the friction will become greater.
4. Wear-resistance and long service life: the wear-resistance of general reinforced floor is about 6000 revolutions, and the wear-resistance of SPC floor can reach about 16000 revolutions or even higher. Super wear-resistant performance, impact resistance, and not easy to deform, with a service life of more than 20 years.
5. Convenient and fast installation: In foreign countries, you can buy it back from the supermarket and install it yourself. Its lock type adopts international patent, the two sides of the bayonet are aligned, and it can be buckled together, which is very convenient for installation. No special treatment is required on the ground, it can be installed directly after leveling/self-leveling. It can be paved directly on the original tiles and on the floor without knocking out the old tiles, which is very suitable for the renovation and renovation of old houses.
6. Adapt to floor heating, heat preservation and energy saving, and do not release harmful gas: the base layer of stone rock powder is like mineral rock, has good thermal conductivity and thermal stability, and is very suitable for installing floor heating. After reaching a certain temperature, the heat is released evenly. Its base material has a flexible rebound layer, and the wear-resistant layer on the surface can achieve effective thermal insulation. SPC floor itself does not contain formaldehyde and harmful substances, so it will not release formaldehyde and harmful gases when exposed to heat.
If you want to know more about it please do not hesitate to
contact me. WhatsApp:+86-15966835076.
