Storage and maintenance of plastic coated hose

Storage and maintenance of plastic coated hose
After the plastic coated hose is used up, it must be stored and maintained for better use in the future, so the following precautions should be taken

Tools / raw materials

Method / Step

1. Regularly check for abnormalities. During use, be sure to implement a regular inspection system. The service life is affected by the physical and chemical properties of the carrier, temperature, flow rate, pressure, and amplitude frequency. When abnormal signs are found, they should be immediately stopped and replaced.


2. During the assembly process, you need to select a suitable size joint. When installing and matching, you should process the end into a round shape. When the joint is installed in the plastic coated hose, apply grease to the joint and the plastic coated hose. Use fire to roast, if it can not be loaded, you can use hot water to heat it and then put it into the joint. When tightening, an appropriate amount of room should be left to prevent damage to the plastic coated hose.


3. After use, the internal residues should be removed and placed indoors or in a dry and ventilated place, at least 1M away from the heat source, and no discharge equipment such as ozone or sparks can be generated nearby.