Description
This type of machine is an efficient mixing and basic equipment. It has small shear plastic, and the material is not easy to decompose. It can be equipped with corresponding molds and auxiliary machines. It can directly extrude various thermoplastics, especially hard polyvinyl chloride powder. It can also complete various plastic modification and powder granulation processes after forming into tubes, plates, sheets, films and profiled materials. This machine adopts frequency conversion AC motor, controllable frequency conversion and variable speed, equipped with overload protection and fault alarm, screw core oil circulation constant temperature, barrel oil cooling, and is equipped with vacuum exhaust pipe device and quantitative feeding device.
Conical twin screw plastic extruder product advantages
Under the conditions of plastic processing and molding technology are basically the same, compared with other extruders of similar specifications, this series of extruders can use larger head pressure.
The transmission gear box used in this extruder has the advantages of large bearing capacity, low manufacturing cost and convenient maintenance because of structural reasons.
Both the screw and the barrel are connected to the gear box by a splined sleeve. If the equipment is to be repaired, it takes only a few minutes to separate the screw, barrel and gear box. Can shorten the maintenance time, while reducing labor intensity.
Get more stable plasticizing effect.
The feeding surface area is large and the feeding effect is good.
In the feeding section, due to the relatively large diameter of the screw root, the screw core temperature control system is relatively easy to install.
Conical twin screw plastic extruder product advantages
Under the conditions of plastic processing and molding technology are basically the same, compared with other extruders of similar specifications, this series of extruders can use larger head pressure.
The transmission gear box used in this extruder has the advantages of large bearing capacity, low manufacturing cost and convenient maintenance because of structural reasons.
Both the screw and the barrel are connected to the gear box by a splined sleeve. If the equipment is to be repaired, it takes only a few minutes to separate the screw, barrel and gear box. Can shorten the maintenance time, while reducing labor intensity.
Get more stable plasticizing effect.
The feeding surface area is large and the feeding effect is good.
In the feeding section, due to the relatively large diameter of the screw root, the screw core temperature control system is relatively easy to install.
The screw is short and the extruder is compact.
