Knowledge about aluminum-plastic pipes, uses of aluminum-plastic pipes
Knowledge about aluminum-plastic pipes, uses of aluminum-plastic pipesNow, the aluminum-plastic pipe product is already common in our daily life, and the aluminum-plastic pipe joint is inseparable from the aluminum-plastic pipe, so it is also necessary for us to learn more about the common knowledge and information about the aluminum-plastic pipe joint.
The aluminum-plastic pipe joint will leak water, so after the leak occurs, it should be dealt with in time. The specific treatment methods are as follows:
1. First cut off the water source, then remove the male and female nuts connected to the compression joint, wrap several layers of thread sealing tape on the thread, and then reinstall the joint.
2. Once the sleeve joint leaks, it may be necessary to remove the joint and reinstall many water pipes, so the repairman should be notified in time for repair.
3. No matter which kind of water pipe joint leaks, you can first use the special tape to repair the water pipe for temporary repair. The specific operation method is: first close the valve, cut off the water source, open the faucet to the appropriate position to relieve most of the pressure in the water pipe, and then use a special adhesive tape to tie up the leaking part, or seal it with a ring gas resin adhesive live.
1. Hot and cold water piping system:
The interior of the aluminum-plastic composite pipe is smooth, non-corrosive, and does not form scale, which is 30% larger than the metal pipe flow. It is easy to bend, can be installed directly beyond the beam and column, can be buried in the wall and concrete, and a simple metal detector can detect the installation location, so the tube is very suitable for cold and hot water pipelines in industrial and civil buildings System use.
2. Department of indoor gas pipeline:
The longitudinally welded aluminum tube is sandwiched between plastics, so that the all-round tube can withstand higher working pressure, and the gas (oxygen) permeability is zero, and the length of the tube can reduce the joint to avoid leakage, so this tube is used for compressed air and gas , Oxygen and other gas transmission lines are safe and reliable.
3. Solar air conditioning piping system:
The aluminum-plastic composite pipe is not easy to frost, and has good thermal insulation, which improves the efficiency of solar energy and air conditioning systems.
If you want to know more about it please do not hesitate to
contact me. WhatsApp:+86-15966835076.
