MPP power protection tube raw material and formula description

The main raw material of MPP power tube is polypropylene. In its production process, it adopts a special compound reinforced modified formula, and then a new structural wall material pipeline made by special processing technology. The power tube has the advantages of novel structure, high strength, good temperature resistance, simple construction and cost saving. The use of modified polypropylene as the main raw material eliminates the need for dredging, digging and destroying the road surface, and lays pipelines and cables in special sections such as roads, railways, buildings, and under the riverbed.
MPP power tube
     As a new industry product of power pipes for excavation, MPP corrugated power pipes are used in urban and rural open-cut cable draining projects for high-voltage transmission lines and cables of 10KV or more. Laying and using; if the requirements for earthquake resistance and compression are more special or alternative steel tubes, reinforced (SN50) special customized products should be selected.
 
     Compared with the traditional "digging and burying pipe method", MPP power pipes are more environmentally friendly, avoiding dusty, traffic jams and other disturbances caused by traditional construction. This technology can also be used in some Lay pipelines in areas where excavation work is carried out, such as monument protection areas, downtown areas, crop and farmland protection areas, highways, rivers, etc.If you want to know more about it please do not hesitate to contact me. WhatsApp:+86-15966835076
Power tube is a very common item in people's lives. To use this product, we must first understand its performance characteristics.
1. Lightweight: The density of CPVC is 1350-1500KG / M3, the weight is generally 1/10 of the same pressure pipe, 1/6 of the steel pipe, and the transportation and installation are convenient;
2. Convenient construction and significant economic benefits: CPVC high-voltage power pipe joints, waterproof seals, brackets and other components. The design is reasonable and the construction is convenient. There is no need to cast a protective layer of concrete. The brackets are connected by a combination to shorten the construction period. There is no radioactive carcinogen, and it has significant economic and social benefits.
3. Excellent corrosion resistance: CPVC is resistant to acid, alkali, salt and other chemical solvents, and will not crack in case of grease;
4. High strength, flame retardant, smoke suppression, heat resistance, and long service life: CPVC high-voltage power pipes completely overcome the shortcomings of poor weather resistance of ordinary PVC pipes. Its strength can replace the steel pipe and overcome the phenomenon that the steel pipe is easy to corrode and the single magnetic cable is damaged due to the high temperature caused by the closed magnetic circuit. Index ≥40%, basically no heat transfer, linear expansion coefficient is 6.3 * 10-5CM / CM ℃ Vicat softening temperature ≥93 ℃, can be used at 105 ℃;
5. Superior performance-price ratio: CPVC pipe is slightly lower than similar cement pressure pipes, 20% lower than similar steel pipes, and the overall cost can be reduced by 15%.
 
      With the development of science and technology, people's quality of life is continuously improved, and self-care awareness is also constantly enhanced. Health and safety have become the two major themes that modern people are most concerned about. Therefore, the pipes made of polyethylene, polypropylene, polybutene and aluminum-plastic composite pipes, which are called green pipes.