SPC floor sheet machine brief introduction
SPC floor equipment is the equipment for producing SPC stone-plastic flooring with PVC and calcium powder as the main raw materials. The raw materials are extruded through plasticizing, four-roll calendering and heat compressing color film decorative layer and wear-resistant layer, made with various relief wood grains and various patterns, and directly heat compressing the bottom soft cushion sound-absorbing layer, and then UV Produced by processes such as wear-resistant treatment, slitting and grooving. The big difference between it and traditional floor is environmental protection, wear resistance and fire prevention. The stone-plastic floor is made of PVC powder, additives, etc. after high-temperature calendering and a wear-resistant layer on the surface. It is impossible to contain harmful substances such as formaldehyde. It is an environmentally friendly floor that is 100% formaldehyde-free. At the same time, stone plastic flooring does not need to cut down trees and destroy the ecology, so it has won the title of "environmental protection new material", which is also a major advantage of stone plastic flooring compared with traditional paving. High safety, insulation, flame retardant, corrosion resistance, acid and alkali resistance, 5% acetic acid. 5% hydrochloric acid, no abnormalities on the surface. Five seconds away from the flame can extinguish. The pattern is novel, a variety of patterns can be selected, the color is gorgeous, natural and realistic, any combination of pattern design, highlighting the individual color. The installation is quick and convenient, and the construction is convenient. It can be sawed, planed, nailed, and glue-free. Long service life of more than 20 years. The SPC bottom board is divided into a substrate layer, a printed layer, a wear-resistant layer and a UV layer. The connection of each layer is formed by hot compressing and rolling once, completely subverting the glue bonding; the material used for SPC floor It is mainly made of resin powder and calcium powder, and is processed through a series of processes such as mixing, high temperature, extrusion, and shaping. The density is between 1.8-2.2, the shrinkage ratio is one thousandth, the adhesion force is more than 50N, and it is resistant. Grinding between 12000-15000 revolutions, the surface is hot and smoked between 500 degrees Celsius and 800 degrees Celsius. It is not only practical and environmentally friendly, it does not contain any volatiles, carcinogens, heavy metals and formaldehyde; but it will produce a lot of dust in the production of floors , Causing harm to the health of workers who inhale dust.
If you want to know more about it please do not hesitate to
contact me. WhatsApp:+86-15966835076.
