PVC pipe production technology and process PVC plastic is a multi-component plastic. Different additives can be added according to different uses. Due to the different components, PVC products exhibit different physical and mechanical properties, which are used for different occasions. PVC plastic pipes account for a large proportion of plastic pipes. PVC water pipes are produced with a resin a
Precautions for the production process and construction of PVC pipes 1. Production process raw material + auxiliary preparation → mixing → conveying and feeding → forced feeding → conical twin screw extruder → extrusion die → sizing sleeve → spray vacuum setting box → immersion cooling water tank → ink printing machine → Crawler tractor → knife cutting machine → pipe stacking frame → finished pro
Please note: Five precautions in the production process of PVC pipes PVC pipe is one of the most widely used pipes in the pipe industry. It is used frequently in construction and decoration. Therefore, the quality of PVC pipe is very strict, and there are many precautions in the production process. PVC pipe manufacturer Peida Plastics will tell you in detail today what matters need to be paid a
What are the hazards to the body during the production of PVC pipes? The HCL gas released by PVC in the production process is harmful to the human body, but there is generally no problem with good ventilation. PVC pipes are soft and hard. Generally, a large amount of plastic PVC pipes are added with plasticizers, which may be environmentally friendly plasticizers containing phthalates. Pay atten
How to solve the problems in the production process of PVC pipe production line 1. There are burn marks on the surface of the tube. The possible reasons are that the temperature of the fuselage or the head is too high; the head and the filter are not cleaned; there are impurities in the pellet; the thermal stability of the raw material is poor or the thermal stability dose is too small; the tem
Common problems, causes and solutions of PVC production and processing (summary) (1) Common problems, causes and solutions of pipes Common problems Possible cause Solution There are lumps in the tube wall (like bubbles). The moisture of the material is too high. Properly increase the mixing temperature and extend the mixing time Impurities mixed in materials Check the source of impuritie
PVC pipe production problems and solutions There are always various problems in the process of PVC pipe production. Only by solving these problems can high-quality PVC pipes be produced. To share with you some PVC pipe production problems and solutions. pvc tube 1. The outer surface of the plastic pipe is rough: adjust the process temperature: reduce the cooling water temperature, the opt
A collection of problems in the production process of PVC pipes Every new operator must have encountered a lot of big and small questions when operating PVC pipe equipment.Here are some solutions to the conventional questions. Main points of PVC pipe production process control 1. Process temperature: During start-up and normal production, temperature is one of the main factors affecting plast
