let us learn How to use pet packing belt
let us learn How to use pet packing beltPacking belt is also called packing belt or binding belt plastic steel belt. Pet is mainly composed of polyester resin; appearance: transparent. Flammability: it is inflammable and continues to burn after leaving the flame. The flame is yellow, black smoke; slightly expanded, sometimes cracked, with the smell of styrene. Its chemical composition is refined from polyethylene terephthalate as the main raw material. The processing process of PET plastic steel packing belt is to add the material into the injection molding machine, enter the screw, heat it, and extrude it through the grinding head. Enter the water tank to cool down, and then pull the plastic steel belt to form. Enter the embossing wheel to press out the pattern, and then enter the reaming sink. By drawing water or blowing dry with wind, the third traction will pull out the formed plastic steel belt, enter the winder for winding, and then pack it. Widely used in Metallurgical Building Materials and other industries. Pet packing belt has the advantages of low cost, convenient use and environmental protection, which are loved by more and more customers. Many people often encounter some problems in use. Here I will give you some simple packing operation methods.
Jiangyin packing belt
1、 How to use pet packing tape:
. strap: bind the package with the strap, hold the overlapped part with the left hand, leave about 300 mm at the end, and gently pull out the rest with the right hand. Install the packing belt: hold the handle and the tensioner with your right hand (to ensure that the gap between the tightening wheel and the pressing plate hanger is large), and insert the upper and lower parts of the packing belt into the packer at the same time. In addition, special reminder: the overlapping part of the packing belt must be separated by the lower blade of the fixed cutter: loosen the tensioner (the tightening wheel tightly clamps the packing belt).
2. Tighten the packing belt: press and hold the tension switch lever (right side) with right hand until the packing belt is completely tightened.
3. Vibration and cut-off: press and hold the vibrating switch rod with your right hand until the packing belt is cut off and the fusion joint is closed. Press and hold the pneumatic packer vibration switch lever until the vibration timer stops automatically.
4. Remove the packing belt: press the handle and tensioner with the right hand, and press the reversing switch with the right thumb until the packing belt is loose from the tightening wheel. Tighten the handle and tensioner, and remove the tool from the packing belt
If you want to know more about it please do not hesitate to
contact me. WhatsApp:+86-15966835076.
